SKU: FM-12B
Flexmaster Dock Fender 12' Long Black, unmounted
- Ideal for most boats ranging from 30' to 90'
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
- Special order, non-refundable, non-returnable
Each fender requires a minimum of 25 #10 x 1-1/4" Wood Screws, 305 Stainless, T25 Torx Drive AND 25 #10 Finishing Washers, Stainless Steel, PLUS either 4 × 1/2" x 7" Hex Lag Bolt, Stainless Steel OR 4 × 1/2" x 6" Hex Lag Bolt, Stainless Steel.
The lag bolt goes thru the lumber into the piling and then the screws and washers go down the side of the fender into the side of the lumber. The linked screws and finishing washers are sold in packs of 50 pieces. Purchase 1 pack of screws AND 1 pack of washers, plus 4 lag bolts of your chosen size, to cover the hardware requirements for one fender.
If you’d like to purchase the required hardware, use the Add to Cart buttons below.
- Regular price
- $181.44
- Sale price
- $181.44
- Regular price
-
Payment & Security
Your payment information is processed securely. We do not store or have access to your credit card details.
Flexmaster Dock Fender 12' Long Black, unmounted
SKU: FM-12B
- Regular price
- $181.44
- Sale price
- $181.44
- Regular price
-
NOTE: Unmounted Flexmaster fenders do not come pre-drilled for mounting to the piling, so please read the installation tips below:
Installation Tips for Unmounted Flexmaster:
- Mount a recycled plastic 2" x 4" or 4" x 4" to the wooden piling at the appropriate height.
- On 2" x 4" installations, most customers use a minimum of three 1/2" x 5" lag bolts (spaced at 30" on center maximum).
- On 4" x 4" installations, most customers use a minimum of three 1/2" x 7" lag bolts (spaced at 30" on center maximum). - Slide the unmounted Flexmaster Fenders over the installed 2" x 4" or 4" x 4", then nail or screw in place using 1-1/2" long type 316 stainless steel ring shank roofing nails or stainless steel screws. Recommended spacing for nails or screws is 6" to 8" on center, along both sides.
- A Flexmaster end cap may then be added to the top to dress up your fender installation, giving it a clean, professional look.
Features:
- Ideal for most boats ranging from 30' to 90'
- UV resistant, not affected by marine borers or barnacles
- Mounts to any nominal 2" x 4" or 4" x 4"
- Fender only, end cap and lumber sold seperately
- Special order, non-refundable, non-returnable
| Item #: | FM-12B |
| Height: | 4.75" * |
| Width: | 4.0" * |
| Length: | 12' * |
| Material: | PVC Compound |
| Color: | Black |
| Recommended For: | Most boats ranging from 30' to 90' |
| Weight: | 38 lbs. * |
